Packs/Racks/Baskets

A classic Wald design, this Flashlight Holder can clamp a standard size flashlight to your handlebar or serve as a convenient wall mount.

The shoulder strap for your Ultimate Compact, Bike-Box, E-Glow, E-Mate, Velo-Shopper, Trunk-Bag RC or Bike-Tourer is just what you need to carry on once you reach your destination. CONTENT: - 1 shoulder strap with plastic pad

This mounting set allows you to attach your Saddle-Bags to other bicycles. For all Saddle-Bag, MudRacer and Micro models. - 1 mounting set for Saddle-Bags, including screws

- Hardware included - Fits all Sunlite Gold-Tec racks - Cut to length

- Fits Sunlite 4506/45119 alloy racks

For BabySeat II Racks and MTX Tubular Racks (34.5 cm in length for small bike frames). - If you have a small frame bike and cannot install Topeak rack or BabySeat in recommended position (2 or 3 degrees from horizontal), please use the 34.5cm extra long mounting bracket arm for proper installation.

The B-RAD Dogbone allows for the bottle cage to mounted off center with additional B-RAD accessories, without needing the B-RAD base. Most commonly used for smaller, curved or dual suspension frames where the slotted bases won't fit or are not needed.

Replaces stock Streamliner foot to adapt any Streamliner rack (sold separately) to fit onto standard 10mm nutted wheel axles. Ideal for fixies, cruisers, urban bikes and traditional bikes without eyelets. CONSTRUCTION • Aluminum ADDED BENEFIT • Makes the Streamliner rack (sold separately) even more versatile

Replacement waterproof liners for Banjo Brothers bags. To get correct replacement liner, measure across the top edge of liner from one welded seam to the opposite seam (do not measure to cut edges of liner). Medium liner is 11" wide and Large is 12" wide. - Works only with models 01150, 01150R and 01150W - Welded seams - Not suitable as a stand-alone bag

- Stretch web secures those hard-to-hold items - Great for any rack - 4 easy-to-handle molded hooks attach anywhere - Dimensions 11" x 11"

A stretch web net that helps secure items to a rear rack. - Four nylon molded hooks for rack attachment - Fits any rack - Dimensions: 11 x 11" - Custom-molded silicone - Stretches to three times its size

Metric screws and plastic screws for mounting the upper QL2.1 rail. For all models with the QL2.1 system. CONTENT (FOR ONE PAIR OF BAGS): - 4x metric screws incl. nut washers - 2x self-tapping screws incl. plastic washers

The Loop Junk Strap is the same 120cm woven nylon strap with a stainless steel buckle that Surly's regular junk strap is. The Loop Style Junk Strap, however, has a loop sewn at each end of the strap so you can wrap them around small diameter tubing like that used for racks and handlebars. They secure in the middle with the stainless steel buckle. Surly made these Loop Style Junk Straps because it offers another method for those wanting to secure cargo to their racks and or bikes. Junk Straps of any kind are useful in many different situations so toss a few in your backpack and always be ready to tie something to anything else. - For general tie down use - 42" loop strap, plus 8" closure buckle strap

Mount a rack to any bike with this lightweight adapter that adds two M5 rear threaded eyelets to the seatpost. CONSTRUCTION • Aluminum

Mount a rack to any bike with this lightweight adapter that adds two M5 rear threaded eyelets to the seatpost. CONSTRUCTION • Aluminum

Mount a rack to any bike with this lightweight adapter that adds two M5 rear threaded eyelets to the seatpost. CONSTRUCTION • Aluminum

Mount a rack to any bike with this lightweight adapter that adds two M5 rear threaded eyelets to the seatpost. CONSTRUCTION • Aluminum

- Top quality synthetic woven construction - UV treatment for long term durability - Synthetic handlebar mounting straps - 24 x 16 x 15cm / 9.5 x 6.3 x 6-inches

For all models with the QL1 or QL2 system. Missing or defective screws or nuts? Get this screw-and-nut set to conveniently replace any defective or missing screws. - 12 screws - 12 plastic nuts

Extend the life of your Dummy bags with this replaceable wear patch.

Mudgard Bracket for Rear Carriers

Common on European utility bikes, a front wheel stabilizer makes loading front racks simpler. It is a spring connecting the fork to the down tube. It adds a subtle self centering action to the front wheel, making loading and unloading of a bike with a basket, or say, our Porteur Rack much easier. The spring also offers some resistance to steering, so it counteracts deflections from hitting potholes and road debris. - Mounts to the back of the fork crown via brake bolt or through bolt - Fork crown mount diameter is made to fit an M6 bolt - common on nutted calipers - Use Sheldon's Fender Nuts to work with recessed brake bolts - Rust resistant and includes all required brackets and hardware - Available for Small (31.8mm and smaller) and Large (38-62mm) sized downtubes

Surly Front Rack Hardware

- Replacement parts for Bkbrn Type SGL bike racks - Sold as a set

Round Monostay Adapter - Hardware included

For all models with the QL2 or QL2.1 system. If the standard mounting hooks are too small to fit on the tubes of your bike rack, simply replace the standard hooks with a set of 18-mm ORTLIEB hooks (cannot be used with inserts). - 2 QL2.1 mounting hooks (18 mm) and adjustable handle

- Adjustable - 360-460mm (14.25-18.25") - Fits most wire baskets - Mount: Brace Only

Are you trying to carry an oddly-shaped item on your rack? Sunlite's Bungee Cargo Net will secure it for the ride home. It is 13 x 13 inches in size and the 4 vinyl coated hooks help secure it to your rack.

- Interface plates for luggage carrier rack to convert any non MIK ready carrier & non MIK ready bicycle bag to a MIK system (for use with Basil bags only) - Compatible with luggage carriers from 80 up to 150 mm - -01: carrier plate for rear racks that are not MIK ready. - -02: adapter plate for bicycle rear bags that are not MIK ready - Suitable for e-bikes - Max load: 26lbs/12kg

The integrable mesh inner pocket with zipper for the Handlebar-Pack QR. For all small items, such as wallet, snacks, cell phone or keys.

For all models with the QL1 system from 1993. Worn, broken or lost QL1 mounting hooks? No problem! Simply replace the hooks with a new set of QL1 hooks and adjustable handle. If the new hooks are too loose on your bike rack, use the appropriate hook inserts for a snug fit. - 2 QL1 hooks (16 mm) and adjustable handle - 1 pair each of hook inserts in sizes 8 mm and 11 mm

For all models with the QL2.1 system, except for: Office-Bag, Commuter-Bag, Commuter-Bag Two and Downtown Two Worn, broken or lost mounting hooks? Replace your QL2.1 hooks with a new set of QL2.1 hooks and plastic handle. If the new hooks are too loose on your bike rack, use the appropriate hook inserts for a snug fit. - 2 QL2.1 hooks (16 mm) with plastic handle - 1 pair each of hook inserts in sizes 8 mm, 10 mm and 12 mm

- Strap with buckle and hook for supporting the Seat-Packs - Prevents lowering of pack with uneven weight distribution - Additional support for Seat-Pack straps when fully loaded - Excessive strap is fixed with Velcro - Can be used for Seat-Pack M and L

The PDW Outpost Mount allows you to attach a handlebar-mounted headlight to the side of your tapered wire basket—eliminating the problem of basket cargo blocking the light beam. The attachment plate compensates for the angle of a tapered wire basket, allowing the headlight to stay nice and level. - 32mm diameter clamping area for lights - Attaches with two M5 bolts and a steel backing plate - Mounts on left or right side

- Used for attaching rear racks onto mono stay bikes - Rubber coated steel for all weather durability

- Used for attaching rear racks to monostays or seatposts on bikes without traditional seatstays - Rubber coated steel for all weather durability

Add some cargo capacity to your bike with Sunlite's Lift-Off Front Basket. This no-frills hauler hooks over your bars and has a handle for easy carrying. It's sturdy, simple and functional.

Don't be fooled by its minimalistic design—the SupaStrap locks your gear down tight. The ultra secure design conquers cobblestones, savage trails, and everything in between. - SupaDuty Velcro main strap - TiteLock integrated Velcro lock - Bulletproof YKK buckle

The Gel Fuel Rack / NDM 1 give the user the ability to reach their gels and similar snacks at any time while our on the trails. The "grab-n-pull" aspect of the rack makes it super fast for you to fuel up with new energy. The accessory is compatible with backpacks equipped with the No Dancing Monkey 1.0 and No Dancing Monkey 1.2 harnesses. This attachment is compatible with the following products: - Raw - MTB Hydro - Airborne - Ranger - Patriot - Vertical - Outlander (NOT Compatible with Outlander PRO) With the Gel Fuel Rack / NDM 1 you'll always have instant access to your gels or other small snacks. The "grab-n-pull" make it super fast to fuel up with new energy. The accessory can be attached to the harness of all backpacks equipped with the No Dancing Monkey 1.0 and No Dancing Monkey 1.2 harnesses. The accessory is simply attached to the Velcro shoulder strap. This attachment is compatible with the following products:

Banjo Brothers' Handlebar bag is a great way to add extra carrying capacity to any bike. It conveniently attaches to your bars or even under your saddle with its easy-to-use straps. The rigid liner prevents sagging and there's a reflective strip protecting a 2-way zipper.

- Powder coated steel construction - Mesh basket for small item loss prevention - Carrying handle for off bike transport - Lift-off handlebar mount design - 24 x 17 x 13 / 9.5 x 6.7 x 5.2-inches

The Lizard Skins Tube Strap is an easy way to stow a spare tube. The minimally designed Tube Strap is a lightweight on-bike storage solution for any rider. This versatile strap is made to securely attach under seats and other locations on bike frames. - On-bike storage solution - Inner sleeve to compress a tube - Silicone strips for stability - Compact and lightweight - Attach under the seat or other locations on the bike frame - Weight 1.3oz (37g)

Free Your Pockets Why carry your tools yourself? Strap them to your bike and forget about them until you actually need them. Enough room for a CO2 cartridge, a small selection of tools + tire levers, and a spare tube. - Stretch hook-and-loop strap adjustment - Ripstop nylon construction - Printed silicone grip - Tri-fold design - 3 inner pockets

Sunlite's Classic Flower Basket is just like the ones you remember as a kid. Made from weather-resistant plastic, it's tough, light and durable. It fits most handlebars and the flowers are removable. Carry your stuff in style.

Sticky Pods Utility Packs, Version 4.0, are the practical and durable bike accessory every cyclists must own. First introduced in 2009, the Sticky Pod has received international recognition from North American, Canadian, New Zealand and United Kingdom cyclists. It’s been featured on websites like Bike Rumor and in magazines such as Mountain Bike Action. Road and mountain bike riders all boast how the lightweight, water-resistant pods hold all the essential items needed for short trips or long hauls. Load up the Sticky Pod with spare tubes, CO2 cartridges, multi-tools, patch kits, ID, cash, and cards and still have plenty of space left over for energy gels and chews. The actual utility pack is lightweight and only adds a few grams to the total load. Added benefits are the tools and other stuff won’t poke you in the back, rip expensive jerseys or cause bodily harm in the event of an accident. Features - Mini Dimensions: 4.75" x 3.75" - Small Dimensions: 9" x 4.25" - Large Dimensions: 10" x 4.25" - Fits snuggly into race-fit and women’s jerseys - Grippy (sticky pod) surface keeps it secure in pocket - Weighs just 80 grams - Touchscreen zippered pocket - Three secured zipper mesh pockets Benefits - Prevents tools and keys from wearing through jersey - Protects jersey and any utility pocket from dirty tools and tubes - Eliminates seat bags and pouches (protects carbon seat posts and shorts from Velcro) - PVC cell phone pocket allows for smart phone accessibility while the device remains safe in the secured pocket

Planet Bike's Little Buddy is the perfect friend to bring along on every ride. It's made of tough material and has a padded, white interior to protect, and make it easy to see your things. Its 44 cubic inches of capacity handle all your essentials. It's also got a diagonal zipper for easy access, a taillight strap (lights sold separately) and reflective piping for visibility.

The Medium Seat Pack mixes a low-profile, aesthetically pleasing shape with ample storage room (9x5x16cm) for your small riding essentials. It attaches to the saddle easily via hook-and-loop straps, and it features a roll-up closure to keep its contents safe. You'll also find a reflective patch at the rear that increases your visibility to motorists in low-light conditions. - Secure attachment to the saddle with easily adjustable hook-and-loop strap. - Roll-up closure for ultimate flexibility of what you can carry and super water-resistance. - Reflective patch on back that also allows for a Stix light to be clipped on securely with the fabric clip. - Dimensions (cm): 9 x 5 x 16

Banjo Brothers' Bar Top Phone Pack secures to your bars and stem with handy hook-and-loop straps to give you quick access to your trusty smartphone. Its crystal-clear cover is touchscreen compatible and it fits virtually all phones. And there's even a handy cubby for your keys and wallet.

Banjo Brothers' Small Seat Bag is perfect for carrying a tube, tire levers, patch kit, a mini tool and some food (each sold separately). It's made from heavy-duty 840-denier nylon with a wide-mouth opening for easy access. And you've got 360 degrees of visibility with reflective accents and a rear tab for a blinkie.

Banjo Brothers' Top Tube Bag is a great add-on to keep your must-haves (phone, wallet, keys, snacks) within reach. It's made from 840-denier nylon with a lined, padded interior. The clear top allows you to see what’s in there while keeping it all dry. Rubber-backed straps keep it in place and protect your bike's finish. You also get a key clip plus reflective piping for extra visibility.

- Powder coated steel construction - Carrying handle for off bike transport - Lift-off handlebar mount design - 36 x 23 x 21cm / 14 x 9 x 8.3-inches

- Internal elastic pocket - Tail light attachment - Reflective piping - Small: 16 x 7.5 x 9cm - Medium: 19 x 8 x 9cm - Large: 21 x 9 x 9.5cm

Thule's Pack n' Pedal Side Frames mount quickly and easily to the sides of their Pack 'n Pedal Tour Rack (sold separately). They allow you to use any model of pannier for increased luggage capacity and a lower center of gravity.

Topeak's TriBag keeps your gear handy so essentials are always within reach. This top tube pack sports a flap that folds over the opening to keep things in place while still allowing on-the-go-access. It attaches via hook-and-loop straps and you'll have plenty of room for carrying your phone, wallet, tools and energy bars. Size - 14 x 10.2 x 4 cm / 5.5” x 4” x 1.6” (Medium) - 18 x 10.2 x 4 cm / 7.1” x 4” x 1.6” (Large) Weight - 59 g / 2.08 oz (Medium) - 72 g / 2.54 oz (Large)

B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Single bottle mount with two slotted holes for adjustments up to 4mm +/- 10mm - Designed to maximize bottle capacity on small frame bikes and dual suspension frames

Banjo Brothers' Bar Top Bag secures to your bars and stem to give you quick access to your essentials. It's great for a cable lock, keys, wallet, phone or snacks. With ballistic fabric on high-wear areas and a rigid padded bottom, it's plenty tough, even for mountain bikes.

- Expands up to 2x size to securely grip any shape - Weatherproof material will not deteriorate - Molded non-scratch hooks

The Muck-Off Essentials case is large enough to hold your smartphone or with a handful of tools. Soft inner divider helps prevent damage to a spare tube or phone. External straps allow case to be attached to a MOLLE system or other bags, expanding their capacity. - Inner Zip pocket to store keys/cash/coins - Fits plus sized smartphones - Size: 17 x 9 x 2cm - MOLLE Webbing straps for attaching MOLLE accessories or onto other bags - Enough space to store your spare tube, tire levers, CO2 and mini-tool

Planet Bike's Big Buddy is the perfect friend to bring along on every ride. It's made of tough material and has a padded, white interior to protect, and make it easy to see your things. Its 80 cubic inches of capacity handle all your essentials. It's also got a diagonal zipper for easy access, a taillight strap (lights sold separately) and reflective piping for safety.

Planet Bike's Snack Sack attaches to your top tube to keep your gear within easy reach. It's made of tough material and has a padded, white interior to make it easy to see your things. Its 43 cubic inches of capacity handle all your essentials. It's also got a dual zipper for easy access and reflective piping, too. Dimensions: 7 x 3.5 x 2 inches