Skip to main content

Filter By:

  • Show More Sizes
  • Show Fewer Sizes

Mountain

Specialized Men's Stumpjumper Expert 29
$4,400.00
Ever had a ride that felt more like an experience than just a ride? Us, too, and we've been chasing that feeling ever since. With the Stumpjumper Expert 29, we've bottled up that feeling and put it into a radical new frame design that's so in-tune with the trail, the bike feels like an extension of your body. Seriously, it's going to make you rethink how a trail bike should ride. Our design goal for the new Stumpjumper was simple—build the ultimate trail bike, one that feels telepathic. And it turns out that this feeling all comes down to stiffness. Think of it this way: when the frame's telling your hands one thing and your feet another, your brain gets confused with the imbalance and the bike feels unstable. In order to fix this, we had to get to work on dialing-in the materials, shapes, and the layout. We started by creating our own mountain-specific stiffness test, and then we looked at the layout with Finite Element Analysis (FEA) to see where we could get the biggest stiffness improvements. This led to a big discovery: The Large and X-Large frames needed more front-end stiffness while the Smalls and Mediums were just fine. We were able to create a frame design that was 20% more efficient. And in the end, this proved to be one of the lightest trail frames on the market, today. When designing the frame with the stiffness targets being a primary goal, we developed a radical new sidearm design. The front-end and rear-end are connected at three points, and the sidearm helps keep all these points super stiff and connected, all while taking about 100 grams out of the rear-end. More explicitly, this minimizes frame flex when the rear suspension is active. We continued down the suspension path with a custom Rx Trail Tune on both the fork and rear shock. Suspension performance is highly dependent on frame, wheel, and rider size, so we use our Rx Tune to get each bike to land in the middle of the adjustment spectrum, and this gives you the biggest possible range to fine-tune your ride. Another focal point of the tune was matching the suspension characteristics between wheel sizes—we developed a specific Rx Tune for each platform. So, no matter what wheel size you prefer, you’ll get perfectly linear suspension. Steps were also taken to make this bike easy to live with. Threaded bottom brackets make a triumphant return, and we made room for up to a 3.0" tire. You're also free to run whatever aftermarket rear shock you want, since we're using standard metric shocks. We revamped the SWAT box, too, making it sleeker, lighter, and with more volume. And customization is furthered with a Flip Chip that lets you to dial-in your Stumpy to your riding style. Switch it from High to Low and it drops your bottom bracket 6mm and slackens the head tube by half-a-degree. Little details also jump out to surprise you, like a newly designed ribbed chainstay protector that makes chain slap a thing of the past and nearly silences the drivetrain. Lastly, we seriously couldn’t make cable routing any easier on carbon models. Full tubes can be found throughout the carbon frame, so all you have to do is push the cable and it’ll come out the other end. No more lazy loop, hidden stashes of magnets, pokey spokes, or pillows to cry in. For the build, you get a solid components package with a full SRAM GX1 Eagle drivetrain, SRAM Guide R disc brakes, RockShox front and rear suspension (150/140mm of travel respectively), and Roval Traverse Carbon 29 wheels. - The Stumpjumper's asymmetrical, FACT 11m carbon fiber construction is lightweight, stiff, and ready to take on the trail. It's built off our 29 Trail Geometry, so it's just the right amount of both capable and comfortable. And with SWAT integration in the down tube, a threaded BB, easy cable routing, and an all-new chain silencer, it's ready for anything the trail, or you, throw at it. - With three different compression adjustments—open/pedal/lock—incredible damping performance, and our Rx Trail Tune, the RockShox Deluxe RT3 perfectly complements the Stumpjumper. - RockShox's Pike is known for its trail performance, and the RC found here has stiff stanchions, a Charger damper, and plenty of sensitivity.
Specialized Stumpjumper Comp Alloy
$3,400.00
Don't worry metal fans, the Stumpjumper Comp Alloy is still alive and well, and with one of the most advanced alloy frames ever developed. With its asymmetrical design, all-new geometry, refined kinematics, and a build kit that strikes the optimal combination of performance and value, it's ready to hit the dirt. THE TRAIL BENCHMARK When we set out to design the all-new Stumpjumper, we pursued some hefty goals. We went after the lightest-possible weight that sacrifices nothing to durability, a stiff chassis that corners on rails, and a geometry that everyone can enjoy, all with the best suspension kinematics we know how to design. Turns out, you can have your cake and eat it too with the new Stumpjumper. PROGRESSIVE GEOMETRY The S-Sizing geometry of the new Stumpjumper hits the progressive sweet spot. Long, low, slack, a short offset fork, a steeper seat tube angle—they're all the talk of the town because they make your ride better. With Flip Chip adjustability you're able to further fine-tune your fit, ensuring that your new Stumpjumper performs flawlessly on whatever terrain you choose.
Scott Spark RC 900 World Cup AXS
$7,299.99
The Spark RC 900 World Cup is a cross-country full-suspension bike on a mission to win. Keeping the ride smooth, a RockShox SID Ultimate fork is paired with a custom RockShox NUDE 3-mode rear shock via our TwinLoc Suspension System. The SRAM Eagle AXS 12-speed wireless drivetrain will move you up the trail and SRAM Level disc brakes will slow you down when it's time to step onto the podium. Evo-Lap Technology - With the proper selection of materials, eighty percent of the work to create a frame is done. But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA (finite element analysis) software, to map out the carbon lay-up. - With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments. - With our Evo-Lap technology we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we’ve optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super light and compact frame without a sacrifice in the stiffness, comfort or impact resistance. The entire range benefitted from our EvoLap technology. ICCR Cable Routing - On the Scale, Spark, Genius and Ransom, to provide a clean look and a functional solution for all the different control cable standards on the market, cable routing is fully internal and designed for full-length cable housing. Routing the cables internally omits bulky external hardware and looks cleaner. The cables can endure a longer lifetime as they are protected within the frame. The entry points are machined alloy removable inserts that come along with the frame and can be chosen according to the setup of the bike. Assembling an electronic group or a dropper post will not be a problem and the look will always be clean-cut. SW Dropouts - On the Scale, Spark, Genius, Ransom and Gambler we’ve redesigned all the parts that can give us significant benefits in terms of performance and functionality. On the previous model the support of the dropout was a bulky additional part molded to the carbon chain stay. The new dropouts are designed to be integrated on the thru-axle system thanks to a hollow tubular design that allows a simple and light weight structure. Available for SRAM and Shimano DM derailleurs, this dropout increases the stiffness and avoids damage to the frame in case of impacts on the rear derailleur. Rocker Link - The Spark carbon linkage is constructed with a compression molding process. It’s 37g lighter than the aluminum equivalent and half the weight of the previous Spark linkage. Making the link in two pieces means all excess material can be removed from the inside of the linkage, without sacrificing stiffness. Key Features - Spark RC Carbon HMX Frame - RockShox SID Ult. RLC3 100mm Fork - RS Nude RLC3, 100mm TwinLoc - SRAM XX1 AXS Eagle 12 Speed - SRAM Level TLM Disc Brakes - Syncros Silverton 1.0 Carbon Wheels - Maxxis Rekon Race Kevlar Tires - Syncros Carbon Parts
Cannondale Trail 5
$950.00
Level Up. A mountain bike built to raise your game and ignite a passion for the trail. Designed for the mountains and ready for anything. Highlights - Light and durable SmartForm C3 Alloy frame - SR Suntour XCM suspension fork, 100mm travel - microSHIFT Advent X 10-speed shifting / Shimano hydraulic disc brakes Where it thrives - Low-impact trails, gravel roads, leisurely rides What it's built for - Handling, durability Wheel size: - Sizes X-Small – Small: 27.5-inch - Sizes Medium – X-Large: 29-inch
Surly Big Dummy Frameset
$1,050.00
Big Dummy is a long-tail cargo bike, which means that not only can you haul a serious amount of cargo, different accessories can be added to your Big Dummy frame and deck depending on what you want to carry. Being a dedicated single-piece frame, instead of an add-on to an existing bike, it’s stiffer and resistant to torsional flex, which provides a better ride and longer lasting frame than long-tail add-ons. Like all Surly's frames, it’s made of size specific, 4130 CroMoly steel – a tube set engineered for cargo that sports lots of little touches that you’ve come to love in a Surly, like clearance for big tires and the use of common component sizes. Figure on being able to carry about 200 pounds (90kg) of cargo. The load weight, and how it’s loaded, will affect the handling somewhat. Also, plan on using gears, especially as cargo weight increases. This may seem obvious, but as you get comfy with it, you will use your full range of gears as never before. The included Dummy Rail Collars provide a secondary retention system for the rack, as well as stiffen the rack system so you can safely carry a passenger.
Specialized Enduro Frame
$2,900.00
If you're looking to build the fastest, most capable enduro race bike, this is the frame you want to start with. The Enduro combines peerless downhill performance with surprisingly-quick acceleration. It delivers blistering speed, mega-travel length, and smart features that're big on performance. Get ready to go fast. - ASTONISHINGLY FAST. UP AND DOWN THE TRAIL. Stomp on the pedals and the new Enduro accelerates far quicker than you'd expect possible from a downhill bruiser. To start, we increased anti-squat, so the suspension better-resists pedal bob. Then, to further its efficiency, we re-directed the angle of the chainstay and upper shock linkages for a much more efficient design. The end result? Less bobbing, more speed. - FAST STARTS WITH FIT. Fast and fit aren't mutually exclusive, which is why the progressive geometry of the Enduro has been designed for going up and down. To start, seat tubes and stack heights don't grow massively between sizes, meaning you can now pick a frame size based on both your height and your riding style. Pair this new sizing style with a slacker head angle, longer reach, and steeper seat tube across the line, and you're left with a quicker and more capable steed, no matter the size. - INCREDIBLY CAPABLE. If the Enduro looks like its sibling, the Demo, it's because they share plenty of downhill DNA. A more-rearward axle path reduces wheel hang-up on big impacts. A low- and forward-positioned shock keeps it planted and confident-feeling at high speeds. And balanced chassis stiffness helps the front-end steer precisely and keeps the rear-end tracking like it's on rails. Add it all up and you have a bike that laughs in the face of the steepest, rockiest trails.
Cannondale F-Si Hi-MOD 1
$9,000.00
Light, but it's no lightweight. A pure XC race mountain bike. Loaded with performance features that ensure victory, all while weighing next to nothing. Highlights - Hi-MOD BallisTec Carbon frame / Lefty Ocho Carbon 100mm fork / Integrated Cannondale App connectivity - Shimano XTR 12-speed shifting / HollowGram crank - HollowGram 25 carbon wheelset / Cannondale 1 carbon bar / ENVE seatpost Where it thrives - In competition, up and down hills What it's built for - Speed, agility, handling
Cannondale Scalpel Hi-MOD Ultimate
$13,000.00
The New Cutting Edge. This is the ultimate XC race bike. Ground-breaking suspension, aggressive geometry and feathery weight let you go full gas from the gun. Highlights - Ultralight Hi-MOD BallisTec carbon FlexPivot frame / Lefty Ocho Carbon fork / Integrated Cannondale App connectivity - New SRAM XX1 Eagle AXS wireless 12-speed group / Level Ultimate disc brakes - ENVE M525 Carbon wheels / M5 carbon bars and post / Stash onboard repair kit Where it thrives - On the race course What it's built for - Chasing podiums
Specialized S-Works Stumpjumper EVO
The S-Works Stumpjumper EVO is much more than just a trail bike, it's a shred-sled built to full-send down the gnarliest trails. Featuring an all-new design, with an adjustable head tube angle, 150mm of performance tuned travel, and the adaptability of S-Sizing, this thing is an absolute ripper. The S-Works Stumpjumper EVO—get rowdy. In true S-Works fashion, the S-Works Stumpjumper EVO is built to the hilt. A Fox Factory fork and rear shock handle suspension duties, while SRAM Code RSC four-piston brakes scrub speed, and a full SRAM AXS wireless groupset completes this lust-worthy build. 150MM OF TRAIL-TAMING TRAVEL - All the travel in the world is useless without the proper kinematics, which is why we kept it at the forefront of the new Stumpjumper EVO design. With the learnings from the suspension design on the Demo and Enduro, and practically countless hours of field and suspension lab development, we've not only improved the pedaling performance of the Stumpjumper, but we've made it more capable, agile, and lively. We increased anti-squat, so the suspension better-resists pedal bob and then, we further-improved bump performance on square-edge hits. Bottom line? This thing shreds trails not legs. ADJUSTABLE GEOMETRY - The S-Sizing geometry of the new Stumpjumper EVO is our most progressive yet. Long, low, slack, a short offset fork, a steeper seat tube angle—they're all the talk of the town because they make your ride better. But the perfect geometry is different for different riders, which is why the geo on the new Stumpjumper EVO is fully adjustable with six different settings. Not only are you able to adjust the BB height by 10mm, but you can adjust your head tube by two-degrees. RIDER-FIRST ENGINEERED - Rider-First Engineered frames use a size-specific approach to ride characteristics that ensures every frame performs flawlessly. So, whether you're a Grom riding an S1, or in need of the lengthy S6, you'll experience the same ride characteristics—on-rail cornering and balanced front and rear stiffness, all at the lightest-possible weight. SWAT - When we introduced the SWAT door on the Stumpjumper in 2016, we increased pocket space, and added room for those "oh s**t" pumps and flat accessories. With the new Stumpjumper, we've kept those same design hallmarks, but have increased the volume and added a SWAT Bladder, that gives you an extra 22oz of water hidden in your downtube. Yes, it's the same size as a small bottle.
Specialized S-Works Stumpjumper EVO Frame
The S-Works Stumpjumper EVO is much more than just a trail bike, it's a shred-sled built to full-send down the gnarliest trails. Featuring an all-new design, with an adjustable head tube angle, 150mm of performance tuned travel, and the adaptability of S-Sizing, this thing is an absolute ripper. The S-Works Stumpjumper EVO—get rowdy. This S-Works Stumpjumper EVO Frame is the perfect canvas to imagine your ultimate ride. Build your totally custom dream bike, make it a reality, and shred happily, partner, no matter where those trails are, or how rowdy they get. 150MM OF TRAIL-TAMING TRAVEL - All the travel in the world is useless without the proper kinematics, which is why we kept it at the forefront of the new Stumpjumper EVO design. With the learnings from the suspension design on the Demo and Enduro, and practically countless hours of field and suspension lab development, we've not only improved the pedaling performance of the Stumpjumper, but we've made it more capable, agile, and lively. We increased anti-squat, so the suspension better-resists pedal bob and then, we further-improved bump performance on square-edge hits. Bottom line? This thing shreds trails not legs. ADJUSTABLE GEOMETRY - The S-Sizing geometry of the new Stumpjumper EVO is our most progressive yet. Long, low, slack, a short offset fork, a steeper seat tube angle—they're all the talk of the town because they make your ride better. But the perfect geometry is different for different riders, which is why the geo on the new Stumpjumper EVO is fully adjustable with six different settings. Not only are you able to adjust the BB height by 10mm, but you can adjust your head tube by two-degrees. RIDER-FIRST ENGINEERED - Rider-First Engineered frames use a size-specific approach to ride characteristics that ensures every frame performs flawlessly. So, whether you're a Grom riding an S1, or in need of the lengthy S6, you'll experience the same ride characteristics—on-rail cornering and balanced front and rear stiffness, all at the lightest-possible weight. SWAT - When we introduced the SWAT door on the Stumpjumper in 2016, we increased pocket space, and added room for those "oh s**t" pumps and flat accessories. With the new Stumpjumper, we've kept those same design hallmarks, but have increased the volume and added a SWAT Bladder, that gives you an extra 22oz of water hidden in your downtube. Yes, it's the same size as a small bottle.
Specialized Stumpjumper EVO Comp
In order to bring EVO fun to the masses, we took our FACT 11m carbon frame (yes, the same one as the S-Works), dressed it with a bullet-proof Shimano SLX 12-speed drivetrain and a tough as nails set of alloy wheels, and set it loose to shred unsuspecting trails everywhere. 150MM OF TRAIL-TAMING TRAVEL All the travel in the world is useless without the proper kinematics, which is why we kept it at the forefront of the new Stumpjumper EVO design. With the learnings from the suspension design on the Demo and Enduro, and practically countless hours of field and suspension lab development, we've not only improved the pedaling performance of the Stumpjumper, but we've made it more capable, agile, and lively. We increased anti-squat, so the suspension better-resists pedal bob and then, we further-improved bump performance on square-edge hits. Bottom line? This thing shreds trails not legs. ADJUSTABLE GEOMETRY The S-Sizing geometry of the new Stumpjumper EVO is our most progressive yet. Long, low, slack, a short offset fork, a steeper seat tube angle—they're all the talk of the town because they make your ride better. But the perfect geometry is different for different riders, which is why the geo on the new Stumpjumper EVO is fully adjustable with six different settings. Not only are you able to adjust the BB height by 10mm, but you can adjust your head tube by two-degrees. RIDER-FIRST ENGINEERED Rider-First Engineered frames use a size-specific approach to ride characteristics that ensures every frame performs flawlessly. So, whether you're a Grom riding an S1, or in need of the lengthy S6, you'll experience the same ride characteristics—on-rail cornering and balanced front and rear stiffness, all at the lightest-possible weight. SWAT When we introduced the SWAT door on the Stumpjumper in 2016, we increased pocket space, and added room for those "oh s**t" pumps and flat accessories. With the new Stumpjumper, we've kept those same design hallmarks, but have increased the volume and added a SWAT Bladder, that gives you an extra 22oz of water hidden in your downtube. Yes, it's the same size as a small bottle.
Specialized Stumpjumper EVO Expert
Total control, unparalleled bump-eating suspension, and a fine-tunable geometry are hallmarks of the all-new Stumpjumper EVO Expert. Top it off with a build that blends quality, affordability, and durability, and it's the perfect trail partner, no matter where those trails are, or how rowdy they get. 150MM OF TRAIL-TAMING TRAVEL All the travel in the world is useless without the proper kinematics, which is why we kept it at the forefront of the new Stumpjumper EVO design. With the learnings from the suspension design on the Demo and Enduro, and practically countless hours of field and suspension lab development, we've not only improved the pedaling performance of the Stumpjumper, but we've made it more capable, agile, and lively. We increased anti-squat, so the suspension better-resists pedal bob and then, we further-improved bump performance on square-edge hits. Bottom line? This thing shreds trails not legs. ADJUSTABLE GEOMETRY The S-Sizing geometry of the new Stumpjumper EVO is our most progressive yet. Long, low, slack, a short offset fork, a steeper seat tube angle—they're all the talk of the town because they make your ride better. But the perfect geometry is different for different riders, which is why the geo on the new Stumpjumper EVO is fully adjustable with six different settings. Not only are you able to adjust the BB height by 10mm, but you can adjust your head tube by two-degrees. RIDER-FIRST ENGINEERED Rider-First Engineered frames use a size-specific approach to ride characteristics that ensures every frame performs flawlessly. So, whether you're a Grom riding an S1, or in need of the lengthy S6, you'll experience the same ride characteristics—on-rail cornering and balanced front and rear stiffness, all at the lightest-possible weight. SWAT When we introduced the SWAT door on the Stumpjumper in 2016, we increased pocket space, and added room for those "oh s**t" pumps and flat accessories. With the new Stumpjumper, we've kept those same design hallmarks, but have increased the volume and added a SWAT Bladder, that gives you an extra 22oz of water hidden in your downtube. Yes, it's the same size as a small bottle.
Specialized Stumpjumper EVO LTD
What do you get when you pair a 29-inch front wheel with a 27.5-inch rear wheel? The Stumpjumper EVO LTD, that's what. With all of the traction and handling benefits of a 29er, but with a smaller, more maneuverable rear wheel, this mullet setup suits a more jibby, playful style. It's right at home at the bike park, and is a total blast to cut loose with on the trail. To enhance its 29/27.5" get-rowdy wheel setup, the Stumpjumper EVO LTD features a RockShox Super Deluxe Plus Coil shock out back, paired with a Zeb Select Plus fork. Top it off with 30mm-wide alloy wheels and a SRAM Eagle drivetrain and the LTD is ready to party. 150MM OF TRAIL-TAMING TRAVEL All the travel in the world is useless without the proper kinematics, which is why we kept it at the forefront of the new Stumpjumper EVO design. With the learnings from the suspension design on the Demo and Enduro, and practically countless hours of field and suspension lab development, we've not only improved the pedaling performance of the Stumpjumper, but we've made it more capable, agile, and lively. We increased anti-squat, so the suspension better-resists pedal bob and then, we further-improved bump performance on square-edge hits. Bottom line? This thing shreds trails not legs. ADJUSTABLE GEOMETRY The S-Sizing geometry of the new Stumpjumper EVO is our most progressive yet. Long, low, slack, a short offset fork, a steeper seat tube angle—they're all the talk of the town because they make your ride better. But the perfect geometry is different for different riders, which is why the geo on the new Stumpjumper EVO is fully adjustable with six different settings. Not only are you able to adjust the BB height by 10mm, but you can adjust your head tube by two-degrees. RIDER-FIRST ENGINEERED Rider-First Engineered frames use a size-specific approach to ride characteristics that ensures every frame performs flawlessly. So, whether you're a Grom riding an S1, or in need of the lengthy S6, you'll experience the same ride characteristics—on-rail cornering and balanced front and rear stiffness, all at the lightest-possible weight. SWAT When we introduced the SWAT door on the Stumpjumper in 2016, we increased pocket space, and added room for those "oh s**t" pumps and flat accessories. With the new Stumpjumper, we've kept those same design hallmarks, but have increased the volume and added a SWAT Bladder, that gives you an extra 22oz of water hidden in your downtube. Yes, it's the same size as a small bottle.
Specialized Stumpjumper EVO Pro
The Stumpjumper EVO Pro is a testament to full-gas trail performance. With an all-new design, from its S-Sizing geometry with an adjustable head tube angle, to its 150mm of shred-ready travel, this thing is a full-on ripper. And to top it off, it's build has been hand-picked to keep overall weight low and stoke high. Fox Factory suspension? Check. Carbon 30mm-wide wheels? Check. XO1 Eagle drivetrain? Oh, yeah. With the Stumpjumper EVO Pro, you get all the goodies at a more palatable price. 150MM OF TRAIL-TAMING TRAVEL All the travel in the world is useless without the proper kinematics, which is why we kept it at the forefront of the new Stumpjumper EVO design. With the learnings from the suspension design on the Demo and Enduro, and practically countless hours of field and suspension lab development, we've not only improved the pedaling performance of the Stumpjumper, but we've made it more capable, agile, and lively. We increased anti-squat, so the suspension better-resists pedal bob and then, we further-improved bump performance on square-edge hits. Bottom line? This thing shreds trails not legs. ADJUSTABLE GEOMETRY The S-Sizing geometry of the new Stumpjumper EVO is our most progressive yet. Long, low, slack, a short offset fork, a steeper seat tube angle—they're all the talk of the town because they make your ride better. But the perfect geometry is different for different riders, which is why the geo on the new Stumpjumper EVO is fully adjustable with six different settings. Not only are you able to adjust the BB height by 10mm, but you can adjust your head tube by two-degrees. RIDER-FIRST ENGINEERED Rider-First Engineered frames use a size-specific approach to ride characteristics that ensures every frame performs flawlessly. So, whether you're a Grom riding an S1, or in need of the lengthy S6, you'll experience the same ride characteristics—on-rail cornering and balanced front and rear stiffness, all at the lightest-possible weight. SWAT When we introduced the SWAT door on the Stumpjumper in 2016, we increased pocket space, and added room for those "oh s**t" pumps and flat accessories. With the new Stumpjumper, we've kept those same design hallmarks, but have increased the volume and added a SWAT Bladder, that gives you an extra 22oz of water hidden in your downtube. Yes, it's the same size as a small bottle.
Scott Spark RC 900 Pro
The Scott Spark RC 900 Pro is a cross-country full-suspension bike on a mission to win. To keep the ride smooth, fast, and light, the Spark RC 900 Pro features a RockShox SID RL3 fork paired with a custom FOX NUDE EVOL 3-mode rear shock via Scott’s on-the-fly TwinLoc Suspension adjustment system. These keep the HMX Carbon frame floating through the course on DT Swiss X1700 Spline CL wheels so you can focus on speed. To generate that speed quickly, the Shimano XTR 12-speed drivetrain brings the gear range to crank up the steepest climbs between swift flats and blistering descents, while XT brakes effectively shed heat buildup and offer tremendous power to control loose downhills and bring you to a stop right in front of the podium. Carbon and titanium Syncros components make up the cockpit on this race machine to deliver a fast and efficient interface between rider and machine.
Scott Spark RC 900 Team Issue AXS
With the Spark RC Team Issue AXS, take your World Championship dreams and start making them a reality. The fastest frame on the market, a wireless SRAM 12-speed groupset and Syncros components combine to give you the perfect tool for the job, whether you're racing a local weekend race or toeing it up for your first World Cup. Evo-Lap Technology - With the proper selection of materials, eighty percent of the work to create a frame is done. But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA(finite element analysis) software, to map out the carbon lay-up. - With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments. - With our Evo-Lap technology we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we’ve optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super light and compact frame without a sacrifice in the stiffness, comfort or impact resistance. The entire range benefitted from our EvoLap technology. ICCR Cable Routing - On the Scale, Spark, Genius and Ransom, to provide a clean look and a functional solution for all the different control cable standards on the market, cable routing is fully internal and designed for full length cable housing. Routing the cables internally omits bulky external hardware and looks cleaner. The cables can endure a longer lifetime as they are protected within the frame. The entry points are machined alloy removable inserts that come along with the frame and can be chosen according to the setup of the bike. Assembling an electronic group or a dropper post will not be a problem and the look will always be clean-cut. SW Dropouts - On the Scale, Spark, Genius, Ransom and Gambler we’ve redesigned all the parts that can give us significant benefits in terms of performance and functionality. On the previous model the support of the dropout was a bulky additional part molded to the carbon chain stay. The new dropouts are designed to be integrated on the thru-axle system thanks to a hollow tubular design that allows a simple and light weight structure. Available for SRAM and Shimano DM derailleurs, this dropout increases the stiffness and avoids damage to the frame in case of impacts on the rear derailleur. TwinLoc Suspension System - With TwinLoc, a rider can effectively control the complete frame, fork, and shock as a system. Why does this matter? A bike with 150mm of suspension travel, correctly set up, has more sag than a bike with 130mm. It's that extra travel that makes it more fun to ride and more capable on the descents, but the greater sag has an oversized effect on the bike's geometry and climbing performance. That's where TwinLoc matters. - TwinLoc helps manage the sag effect in several ways. Whereas most systems only increase low-speed compression in an effort to gain pedaling efficiency, TwinLoc allows us to not only change compression damping, but also to change the spring curve, dynamically altering the geometry of the bike. In Trail mode, the shock is not only firmer, but it has dynamically less travel. The bike sits higher, maintains a steep seat angle for those climbs, and becomes more agile. We also offer a third, full lockout mode for going up in the most efficient manner possible. - These unique settings optimize climbing geometry, even on longer travel bikes. We can eliminate the "long travel effect" that can rob your pedaling efficiency, but we're not robbing you of the full-fun, 150m travel when you point it downhill. From a race setting, to a lunch ride, to an after work trail shred, being able to switch from mode to mode depending on a trails profile at the push of a lever is paramount to riding faster and having a damned good time. Key Features - Spark RC Carbon HMF Frame - RockShox SID Select+RL3 100mm Fork - FOX Nude EVOL, 100mm, TwinLoc - SRAM X01 AXS Eagle 12 Speed - Shimano XT Disc Brakes - Syncros Silverton 2.0 TR Wheels - Maxxis Rekon Race Kevlar Tires - Syncros Carbon Parts
Scott Spark RC 900 World Cup
The Spark RC 900 World Cup is a cross-country full-suspension bike on a mission to win. Keeping the ride smooth, a RockShox SID Select+ fork is paired with a custom RockShox NUDE 3-mode rear shock via our TwinLoc Suspension System. The SRAM X01 Eagle 12-speed drivetrain will move you up the trail and SRAM Level disc brakes will slow you down when it's time to step onto the podium. Evo-Lap Technology - With the proper selection of materials, eighty percent of the work to create a frame is done. But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA (finite element analysis) software, to map out the carbon lay-up. - With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments. - With our Evo-Lap technology we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we’ve optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super light and compact frame without a sacrifice in the stiffness, comfort or impact resistance. The entire range benefitted from our EvoLap technology. ICCR Cable Routing - On the Scale, Spark, Genius and Ransom, to provide a clean look and a functional solution for all the different control cable standards on the market, cable routing is fully internal and designed for full-length cable housing. Routing the cables internally omits bulky external hardware and looks cleaner. The cables can endure a longer lifetime as they are protected within the frame. The entry points are machined alloy removable inserts that come along with the frame and can be chosen according to the setup of the bike. Assembling an electronic group or a dropper post will not be a problem and the look will always be clean-cut. Key Features - Spark RC Carbon HMX Frame - RockShox SID Select+RL3 100mm Fork - RS Nude RL3, 100mm TwinLoc - SRAM X01 Eagle 12 Speed - SRAM Level TLM Disc Brakes - Syncros Silverton 1.0 Carbon Wheels - Maxxis Rekon Race Kevlar Tires - Syncros Carbon Parts
Cannondale Trail 6
With its progressive geometry, impressive construction and high-end features, the Cannondale Trail offers unreal performance and killer value. Built on a stiff, lightweight C2 alloy frame with 100mm of trail-absorbing suspension provided by the SR Suntour fork, the Trail 6 is ready for adventure. The 18-speed drivetrain, featuring a Shimano Acera Shadow rear derailleur and Altus shifters, provides smooth, fast gear changes, while the Shimano hydraulic disc brakes keep you in control no matter what the conditions. Trail-grabbing WTB tires and strong double-wall rims from Cannondale will have you flying fast and furiously, even when the trail does its best to slow you down. To optimize fit and handling, Cannondale uses 27.5-inch wheels on the X-Small and Small frames and 29-inch wheels on larger frame sizes. Dressed up with Cannondale's own high-quality aluminum components, the Trail 6 is ready for your next adventure.
Cannondale Trail Women's 7
Level Up. A mountain bike built to raise your game and ignite a passion for the trail. Designed for the mountains and ready for anything. Highlights - Light and durable SmartForm C3 Alloy frame - SR Suntour XCT suspension fork, 100mm travel - Shimano 8-speed drivetrain w/double chainring crank / Shimano hydraulic disc brakes Where it thrives - Low-impact trails, gravel roads, leisurely ride What it's built for - Handling, durability Wheel size: - Sizes X-Small – Small: 27.5-inch - Sizes Medium – Large: 29-inch
Page 1 of 1