Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Chains

Shimano 105 HG601 11-Speed Chain
$29.99
Super Narrow SIL-TEC HG-X11 Chain (11-speed) FEATURE close - Inner-plate treated with SHIMANO's ultra-low friction surface treatment “SIL-TEC” (inner plate) - Same durability as current 10-speed chain BENEFIT close - System engineered drivetrain component for optimal power transfer - Smooth and precise front and rear shifting - Directional chain - Weight: 257g (114 Link)
Shimano CN-HG701 11-Speed Chain
$42.99
Shimano Ultegra/XT HG701 11-Speed Chain. - HG-X11 special asymmetric plate design for 11-speed. - SIL-TEC on Plate - Chain Connection Type: Pressed Pin - Drivetrain Speeds: 11 - Half Link Chain: No
Shimano Deore 10-speed Chain
$26.99
Shimano's Deore-level 10-speed Chain offers excellent power transfer and top-notch durability. It showcases a mud-shedding design and Shimano's directional design with engineered inner and outer plates for smooth, fast and precise shifting.
Shimano Deore/Tiagra HG53 9-Speed Chain
$29.99
- Deore/Tiagra 9-speed compatible - 3/32-inch - 116 links
Shimano Tiagra 10-Speed Chain
$29.99
Shimano Tiagra CN-4601 10-Speed Chains - For Ultegra 6703 and 105 5703 triple drivetrains, please see 10-Speed Hyperglide non-directional chains - Hyperglide 10-Speed chain - Not compatible with Shimano 10-Speed Dyna-sys mountain bike drivetrains - Directional inner and outer plates designed for better contact with gear teeth allow smooth shifting even under high load conditions - Chromized rivet pins improve wear resistance - Perforated plates for reduced weight - 116 links
Shimano Tiagra 10-speed Chain
$24.99
Shimano's Tiagra 10-speed Chain offers crisp shifting and excellent durability. Smooth, precise shifts come courtesy of the engineered inner and outer plates that are specifically designed to accommodate the unique requirements of a moving chain.
Shimano Ultegra 10-Speed Chain
$43.99
Shimano Ultegra CN-6600 10-Speed Chain - Hyperglide 10-Speed chain - Ultegra 6600 and 105 5600 chains are recommended for use in conjunction with Ultegra 6703 and 105 5703 triple - Optimized chain for HG sprocket which provides a fast and precise rear shifting performance (especially during downshifts) - Chromized rivet pins improve wear resistance - Zinc-alloy plated outer link surface treatment - Chain Connection Type: Pressed Pin - Color: Silver/Gray - Defined Color: Silver - Drivetrain Speeds: 10 - Half Link Chain: No - Links (links): 116 - Weight: 280 grams - Width: 6.1mm
Shimano Ultegra 10-speed Chain
$42.99
Shimano's Ultegra 10-speed Chain offers crisp shifting and excellent durability. Smooth, precise shifts come courtesy of the meticulously engineered inner and outer plate chamfers that are specifically designed to accommodate the unique requirements of a moving chain. And, the plates are perforated to trim precious grams. - Weight: 267g
Shimano XT HG95 10-Speed Chain
$43.99
- 10-speed compatible - Shimano XT - 116 links
Shimano XT/Ultegra HG93 9-Speed Chain
$42.99
- 9-speed compatible - XT/Ultegra - 116 links
SRAM PC-1051 10-Speed Chain
$33.00
SRAM’s 10-speed chain is compatible with all industry-standard 10-speed systems. And, with its great PowerLock connecting link, installation is a snap.
SRAM PC-1071 10-Speed Hollow Pin Chain
$39.00
SRAM's 1071 chain is lightweight, smooth, and precise-shifting. It features the PowerLock connecting link and HollowPin construction for weight savings with no sacrifice of strength. - SRAM Road 10-speed compatible - HollowPin construction for weight savings with no sacrifice of strength - Features the PowerLock connecting link
SRAM PC-1110
$18.00
Designed from a long line of dependable, lightweight chains that are built for toughness, the recommended chain for APEX 1, PC-1110. Designed with SRAM’s trusted XX1 geometry, the PC-1110 features solid pin construction, 11-speed PowerLock and smooth, efficient shifting that you can count on every time out. - Optimized to work with X-SYNC rings for precise and dependable 11-speed performance - Fully compatible with all SRAM 1x drivetrains - Closing Link: PowerLock - Outer Plate: Polished grey - Inner Plate: Polished grey - Pin Treatment: Chrome Hardened - Weight: 232 - 273 grams - Rivet Type: Solid Pin - Speeds: 11
SRAM PC-1130 11-Speed Hollow Pin Chain
$28.00
SRAM’s 11-speed chain features heavily chamfered outer plates for improved shifting and quiet running. And, with its great PowerLock connecting link, installation and removal is a snap.
SRAM PC-1170 11-Speed Hollow Pin Chain
$46.00 - $59.00
SRAM’s 11-speed chain features heavily chamfered outer plates for improved shifting and quiet running. And, with its great PowerLock connecting link, installation and removal is a snap.
SRAM PC-850 8-Speed Chain
$16.00
SRAM's PC-850 Chain makes a trusty partner over hill and dale. It's easy to install, too, thanks to the no-tools-needed PowerLink. Quiet, smooth, reliable and very affordable, the PC-850 is a fine value.
SRAM PC-870 8-Speed Chain
$19.00
SRAM's PC-870 Chain makes a trusty partner over hill and dale. It's easy to install, too, thanks to the no-tools-needed PowerLink. Quiet, smooth and reliable, the PC-870 will take you where you want to go.
SRAM PC-971 9-Speed Chain
$23.00
SRAM’s PC-971 Chain delivers light weight, strength and smoothness to your drivetrain. Its nickel-plated sideplates provide faster and more accurate shifting plus excellent reliability. And, with its great PowerLink, you don’t even need tools to install it.
SRAM XX1 Chain
$51.00
With SRAM's XX1 Chain, it's 1 x 11 all the time, so the chain can be narrower, stronger, faster — all because it doesn't have to deal with high-stress, front chainring shifting. Since it only has to do rear shifts, gear changes are telepathically fast and feathery light. Its "wide tooth, narrow tooth" pattern perfectly matches SRAM's X-Sync chainrings so dropped chains and cumbersome chain-guides are a distant memory. The durability and weight is impressive, too, with SRAM's Hard Chrome tech, hollow pins and a proprietary link finish for improved life span.
SRAM XX1 Eagle Hollowpin Chain
$80.00 - $85.00
It might look normal from the outside, but the engineering inside this incredible new chain design is anything but normal and it makes possible a gear range previously found only in 2-chainring drivetrains. And it’s also the biggest contributor to the Eagle drivetrain’s ultra-smooth, precise, durable and quiet performance. The Eagle chain’s links have a smooth radius, with no sharp edges or chamfers, which yield a significant reduction in noise, friction and wear on chainrings and cassette cogs. This design also allows for a flatter plate, which means more consistent chain riveting and greater overall strength. HARD CHROME technology extends the chain’s optimal performance life, and a Titanium Nitride coating on the Gold and Black models decreases corrosion and further reduces friction.
KMC 1/8-inch Chain
$10.00
- X101: hi-performance, chamfered, anti-drop, lightweight, Singlespeed chain for Mountain, BMX, Fixie, Track applications - Z410HD: heavy duty model has thicker sides plates for 25% higher tens
KMC 5-8sp Mountain & Road Chain
$15.00
- Z51: standard bushingless, chamfered plate chain for 5-8 speed - Z30: economy bushing-less chain for 5-8 speed
KMC S1 1/8-inch Chain
$9.00 - $14.00
The KMC S1 is a single-speed chain suitable for use with internally geared hubs, or any single speed drivetrain. - High pin power with reinforced durability - Offers a quieter riding experience - Anti-drop design - Inner plate chamfering helps to provide fast and smooth shifting - Internal gear hub system compatible - Links (links): 112 - Color: Silver - Width: 9.3mm - Drivetrain Speeds: Single Speed 1/2 x 1/8-inch - Half Link Chain: No
KMC X10.93 10-Speed Chain
$29.00
- Stretch-proof, super-narrow chain for use with 10-speed Campagnolo/Shimano/SRAM - Use: Mountain/Road - Size: 11/128-inch - Width: 5.9mm - Weight: 273 grams - 116 links
KMC X11.93 Chain
$31.00
Solid pins, inner and outer plates make for an economical chain choice with all the performance of higher level KMC X-Series chains. - Includes KMC Missing Link 11 - Optimized chamfer angles for superior stability in extreme chainlines - Upgraded outer plate chamfering for minimized cassette tooth interference - Double X-Bridge structure technology for improved shifting performance - Mushroomed Pin Riveted - Compatible with Shimano, SRAM & Campagnolo 11 Speed Systems
KMC X8.93 Chain
$14.00
Solid pins, inner and outer plates make for an economical chain choice with all the performance of higher level X-Series chains. - Includes KMC Missing Link I - Double X bridge shape with inner and outer plate chamfering for smooth and fast shifting - Mushroom riveted pins for the highest pin power and allows shifting under heavy loads - Stretch Proof heat treatment so the chain last longer and goes farther - Half nickle plated - 1/2" x 3/32" - Weight: 286 gr
KMC X9.93 9sp Chain
$21.00
- X9SL: superlight chain for use with 9-speed, 252g - X9.93: upgraded version of the Z-9000 chain stretchproof, super-narrow chain for use with 9-speed - Pink Lady chains are a limited edition with 15% of sales going directly to the Pink Ribbon Foundation - Width = 11/128-inch
KMC Z410 BMX Chain
$10.00
Z410 is a basic, affordable replacement 1/8th chain. Available in an array of colors for adding a touch of style to your bike. - For non-derailleur bikes: BMX, cruisers, etc. - Bushingless design - Includes KMC Master Link - Links (links): 112 - Width: 9.3mm - Drivetrain Speeds: Single Speed 1/2" x 1/8" - Chain Connection Type: Reusable Master Link - Half Link Chain: No - Weight: 399g
KMC Z50 Chain
$14.00
- 1/2” x 3/32” - 116 Links - Inner Plate Chamferring
KMC Z6 Chain
$14.00
Z6 is a basic, affordable replacement chain for use on 6 and 7 speed bikes. - Features inner plate chamfering to smooth shifting - Z-bridge shape - Links (links): 116 - Width: 7.3 mm - Drivetrain Speeds: 6 , 7 - Chain Connection Type: Reusable Master Link
Page 1 of 2 Next page