Protective/Armor

The Invisa-Lite elbow pads feature a lightweight, minimalist design. - Impact-resistant 3D foams - Breathable lycra - Interior anti-slip silicone band - Double and single needle heavy-duty stitching - Protection Area: Elbow - Pad Type: Foam

The Invisa-Lite knee pads feature 3D foam, Lycra compression fit and anti-slip silicone. - Breathable, lightweight Lycra body - Double and single needle heavy-duty stitching - Protection Area: Knee - Pad Type: Foam

Invisa-Lite shin guards feature harder durometer 3D foam on the outside and an inner softer layer for comfort. - Breathable, lightweight lycra body - Interior anti-slip silicone band - Protection Area: Shin - Pad Type: Foam

The Revive wrist support features a 4-way stretch elastic with a Stabalite buttress support to aid in preventing hyperextension. - One size fits most - Left-hand specific - Protection Area: Wrist - Pad Type: Foam

The Revive wrist support features a 4-way stretch elastic with a Stabalite buttress support to aid in preventing hyperextension. - One size fits most - Right-hand specific - Protection Area: Wrist - Pad Type: Foam

Features D3O high performance foam and an open-back construction so no shoe removal is necessary. • D3O high performance shock absorbing foam on the front and foam padded sidewalls for additional coverage • Perforated Neoprene enhances venting and moisture control; terry lined for wicking and comfort • Integrated stabilization pad centers the knee and ensures a secure fit • Branded rubber grab tabs and RF moniker logo • Open back construction; no shoe removal necessary

When you need some peace of mind on your XC/Trail ride then look at the Charge knee pad for abrasion protection without sacrificing any pedaling comfort. - Butterfly mesh sleeve provides a secure yet breathable fit - Foam panel with stretch cover for abrasion protection - Strategic seam construction for added overall comfort - Silicone gripper along inner top opening plus silicone patch at shin ensures a secure fit - This pad is NOT rated for impact; It is recommended for abrasion-resistance protection only

Low profile knee and shin armor for easy mobility and features D3O Technology. - D3O high performance shock absorbing foam is flexible in it's natural state but will protect upon impact - Perforated Neoprene enhances venting and moisture control; terry lined for wicking and comfort - Additional D3O extension saves shins from "pedal bite"; perfect for dirt jumpers and park riders - Open-back construction; no shoe removal necessary - Integrated Patella stabilization pad centers the knee and ensures fit and proper armor placement - Foam padded side walls offer additional coverage

- Removable D30 high-performance shock absorbing protective foam at hips - Butterfly mesh throughout ensures a second skin fit to keep targeted hip protection in place - Highly durable mesh panels at inner thigh ensure maximum venting - Custom heat-moulded foam at outer thighs offers additional protection against knocks and bumps - Flatlock seam finish ensures mobility and comfort through the rider's full range of motion - High performance, Italian-made chamois with triple-density foam, rapid sweat absorption technology, anti-bacterial properties, and Eschler top fabric - Soft brushed Boxer Style elastic waistband - Custom elastic leg hem holds the short in place - Inner lower leg opening features 'slip panel' designed to glide over protection

We know that the challenge to making a great pair of elbow guards is to build them in such a way that they are comfortable in dynamic movement. We used lightweight 4-way stretch Cordura fabric to create an elbow guard that fits well and allows for the rapid upper body movement required for shifting weight on descents and in turns. D3O viscoelastic material offers excellent protection with minimal weight while maintaining flexibility. Perfect for trail riders who want a bit more protection, but don’t want to slow down. - Light weight pads for Trail riding - D3O viscoelastic sheet material backed with EVA foam provides CE level 1 protection with minimal bulk - Cordura 4-way stretch woven fabric provides durability in high impact areas - Mesh fabric on main sleeve provides breathability - Arm-warmer-inspired design with wide elastic grippers and silicone interior print keeps pads in place - Offers a more forgiving fit than currently available pad designs

We know that the challenge to making a great pair of knee guards is to build them in such a way that they are comfortable to pedal in. After all, they can’t protect you if they’re around your ankles. We used lightweight 4-way stretch Cordura fabric to create a knee guard that fits well and doesn’t restrict the pedal stroke, and kept the back open to prevent material from bunching up behind the knee — a primary source of discomfort. D3O viscoelastic material offers excellent protection with minimal weight while maintaining flexibility. Perfect for trail riders who want a bit more protection, but don’t want to slow down. - Light weight pads for Trail riding - D3O viscoelastic sheet material backed with EVA foam provides CE level 1 protection with minimal bulk - Cordura 4-way stretch woven fabric provides durability in high-impact areas - Mesh fabric on main sleeve provides breathability - Longer knee-warmer-inspired design with wide elastic grippers and silicone interior print keeps pads in place - Offers a more forgiving fit than currently available pad designs

POC's Hip VPD 2.0 Shorts protect your tailbone and hips with Visco-Elastic Polymer Dough that is flexible when moving, then turns rigid upon impact. Wear these liners under your DH shorts and you get muscle support, a chamois and peace of mind. They fit well thanks to stretchy fabric and breathe well due to the ventilated mesh.

POC's Joint VPD 2.0 DH Long Knee pads throw down full-on crash protection for riders pushing their limits and pushing the sport. They use Visco-Elastic Polymer Dough that forms to your legs and is flexible when moving, that then turns rigid upon impact. It's so tough, the 3D molded VPD 2.0 complies with motorcycle standards. Kevlar reinforced stretch fabric and dual straps keep them locked down where they belong. The plastic knee cap adds an extra layer of protection and reduces friction with the ground when crashing. The extra length helps in the event of the dreaded slipped pedal strike.

POC's Joint VPD 2.0 Knee pads offer serious protection that is just shy of full-on DH pads. They use Visco-Elastic Polymer Dough that forms to your body and is flexible when moving, then turns rigid upon impact. It's so tough, the 3D molded VPD 2.0 complies to motorcycle standards. Kevlar reinforced stretch fabric and dual straps keep them locked down where they belong, even in the event of a tumbling crash.

Developed for cyclists who want enhanced flexibility, ventilation, and freedom of movement, Joint VPD Air Elbow is a light-duty elbow pad that uses our lightweight and highly impact-absorbent VPD compound. The pad is covered in reinforced stretch fabric and features neoprene antislip to keep the pad in place, even in rough riding conditions. A crash retention strap further increases security on this lightweight and low-profile elbow pad ideally suited to trail riding. - Lightweight and impact absorbing VPD compound - Reinforced stretch fabric - Neoprene anti-slip on the inside - Designed with a low profile - Crash retention strap (CRS) for a comfortable fit - Neoprene anti-slip on the inside

Lightweight and flexible padding that is barely noticeable - ideal for riders who want complete freedom of movement and reliable protection. The VPD Air padding is both highly flexible and highly ventilated for optimal freedom of movement, comfort and temperature control. The pad is housed in reinforced stretch fabric that stays securely in place thanks to an inner lining of anti-slip neoprene and an elastic strap with velcro fastening. A low-profile design further supports practicality and comfort, enhancing the barely-there feel of the pads. - Lightweight and impact-absorbing VPD compound - Reinforced stretch fabric - Elastic strap for a comfortable fit - Neoprene anti-slip on the inside - Designed with a low profile

The Joint VPD System Elbow is a highly flexible 2ply elbow protector which conforms with international shock absorption standards. The elbow protector features a highly efficient ventilation system and an outer fabric which is made with high tenacity polyamide yarns for low friction and high abrasion resistance. VPD is the perfect material for mountain biking as it wraps around a riders body shape when warm which gives great freedom of movement on a bike. To protect riders during a fall the VPD technology then hardens on impact to help minimize injury. - Extremely flexible and light VPD elbow pad - EN 1621-1 certified shock absorption - Ventilation system constructed within each layer to optimize moisture management and comfort - Low friction polyamide construction high abrasion resistance

The POC Joint VPD System Knee is a lightweight, highly flexible protector that works with the body in all riding positions, warming to and moving as one with the body. In a fall, the material hardens, absorbing the force from any impact. The knee protector conforms to the toughest EN 1621-1 Level 2 standards and features a highly efficient ventilation system to stop the wearer overheating. The outer fabric is constructed from high-tenacity polyamide yarns creating a low friction surface with high abrasion resistance. - Extremely flexible and light VPD knee pad - EN 1621-1 certified shock absorption - Ventilation system constructed within each layer to optimize moisture management and comfort - Low friction, polyamide construction with high abrasion resistance

Old School Neoprene guards are the most comfortable protective gear you will ever wear. Designed by Lizard Skins and manufactured in our Utah Facility. Made of 5 mm perforated Airprene, ¼ inch foam inserts, injected molded plastic inserts and a 2 mm Powertex crash panel. Shin Guards are available in a one size fits all model.

Old School Neoprene guards are the most comfortable protective gear you will ever wear. Designed by Lizard Skins and manufactured in our Utah Facility. Made of 5mm perforated Airprene, .25 inch foam inserts, injected molded plastic inserts and a 2mm Powertex crash panel.

Old School Neoprene guards are the most comfortable protective gear you will ever wear. Designed by Lizard Skins and manufactured in our Utah Facility. Made of 5mm perforated Airprene, 1/4 inch foam inserts, injected molded plastic inserts and a 2mm Powertex crash panel.

A lightweight chest protector with premium hard-shell roost protection. CE tested and certified, the 3D design and adjustable waist straps offer a close fit that is comfortable as well as ventilated and works with or without a Leatt Neck Brace. Next step up in protection level is the 4.5 Chest Protector Junior with impact foam. - Total Leatt protection score of 3 points - Hard shell protector - CE tested and certified as roost protection: Chest EN14021 - Our 3D design ensures a great fit that is very comfortable - Padded base layer to prevent hard shell rubbing on skin - Close fitting allows for over or under the jersey use - Liberal venting helps keep rider cool - Recessed front/rear areas and BraceOn neck brace fitting system allow over/ under the shirt Leatt neck brace fit - Adjustable waist straps for great fit - Weight: 550g Junior fits two sizes: - Small/Medium = 134 – 146cm, 4ft 5" – 4ft 9" - Large/XX-Large = 147 – 159cm, 4ft 9" – 5ft 3"

Leatt's soft-shell 3DF impact foam elbow pads just keep getting better and better. Leatt designed the 3DF 5.0 with a refined sleeve construction with the latest material tech to ensure that ventilation, fit, and anti-slip exceed your expectations and that great protection is a given. Additional features include an Aramid outer layer for durability and a pre-curved design for better fit and function. It's CE tested and certified protection that scores a total of 11 points in the Leatt protection rating system. - 3DF AirFit ventilated soft impact foam - CE tested and certified as impact protection: Elbow EN1621-1 - New 25% slimmer CE impact-certified profile - New wider silicone printed and elastic non-slip cuffs - Anti-odor MoistureCool and AirMesh wicking fabrics - All protection materials are perforated for ventilation - Weight: 350g (pair)

Ultra-slim and soft-impact gel protector. A high-tech elbow protection in a minimalistic, comfortable fit with CE certification, this elbow guard has a lightweight construction which can flex and fit for premium comfort. The AirFlex impact gel is the latest technology in protection. Single sizing and silicone grip panels give you the famous Leatt non-slip fit. - New super-slim and lightweight AirFlex gel impact protection - Our 3D design ensures a great fit that is very comfortable - Premium comfort using MoistureCool and AirMesh wicking fabrics - Silicone lamination, non-slip cuffs to keep protector in place - Silicone printed, cupped elbow grip - Total Leatt protection score of 11 points - CE tested and certified as impact protection: Elbow EN1621-1 - Weight: from 240g (0.53lbs) pair

The Fusion 2.0 Junior was designed specifically for young riders who are looking for all-in-one body protection. Made of 3DF AirFit soft impact foam that offers ventilation, the Fusion 2.0 Junior’s 3D design will fit comfortably. This soft foam, however, absorbs energy upon impact to take those knocks. For added protection, it has a built-in neck brace structure made of fiberglass-reinforced polyamide resin that is engineered to snap off in an emergency. It also has a collarbone cut-out that assists in protecting your fragile bones. CE tested and certified as Personal Protective Equipment and impact protection, it protects your chest, back, shoulders, and flank regions. - Number plate clip-in function - CE tested and certified as Personal Protective Equipment 89/686/EEC - Flank protection - Engineered fracture point on rear thoracic strut designed to snap off in an emergency - Collarbone cut-out helps to protect your most fragile bones - Neck brace structure made of fiberglass-reinforced polyamide resin - Easy-to-use, no-tool sizing adjustments and three-dimensional design for perfect fit - Junior Fit: S/M – XXL (105 – 165cm)

Leatt's soft-shell 3DF impact foam knee pads just keep getting better and better. The Knee Guard 3DF 5.0 Junior has a totally new and refined sleeve construction with the latest material tech for riders who know that ventilation, fit and anti-slip are key and that great protection is a given. It features 3DF AirFit ventilated soft-impact foam, an abrasion-resistant Aramid outer layer for durability, and perforated materials for ventilation. CE tested and certified protection, it scores a total of 13 points in the Leatt protection rating system. - CE tested and certified as impact protection: Knee EN1621-1 - New 25% slimmer CE impact certified profile - New increased side protection - New wider, silicone-printed elastic cuffs - New 30mm low-profile elastic Velcro strap with easy-pull suede finger tabs - Anti-odor MoistureCool and AirMesh wicking fabrics - Pre-curved 3D design for better fit and function - Weight: 450g (pair)

The Knee Guard 3DF 5.0 Mini is now better than ever, designed for riders who know that ventilation, fit, and anti-slip are key and that, with Leatt, great protection is a given. It features 3DF AirFit ventilated soft-impact foam, an abrasion-resistant Aramid outer layer for durability, and perforated materials for ventilation. CE tested for certified protection, it scores a total of 13 points in the Leatt protection rating system. - CE tested and certified as impact protection: Knee EN1621-1 - New 25% slimmer CE impact certified profile - New increased side protection - New wider, silicone-printed elastic cuffs - New 30mm low-profile elastic Velcro strap with easy-pull suede finger tabs - Anti-odor MoistureCool and AirMesh wicking fabrics - Pre-curved 3D design for better fit and function - Weight: 450g (pair)

Ultra Slim and Soft Impact Gel Protector Minimalistic, comfortable, ergonomic fit, and uncompromised CE-certified impact protection. The Airflex Knee Guard Pro is an engineering masterpiece! The lightweight construction and silicone grip panels made it possible to delete the thigh strap and still keep that famous Leatt non-slip fit. This knee guard meets all of our design criteria. By changing over to 3D-shaped impact gel, we achieved the minimalistic slim shape while still keeping the CE Impact protection. - Super slim and lightweight AirFlex impact gel protection - Side and upper knee impact protection - Pre-curved design for optimal fit and function - Silicone-printed, cupped knee grip - Premium comfort using MoistureCool and AirMesh wicking fabrics - All protection materials perforated for ventilation - Silicone-printed, non-slip cuffs - Total Leatt protection score of 15 points - CE tested and certified as impact protection: Knee EN1621-1 - Weight: from 300g (0.66lbs) pair

Made of reinforced polyamide, the DBX 5.5's rigid, non-flexible structure offers revolutionary protection and has been improved over the years to be very comfortable. Leatt neck braces are tested and proven to help reduce your risk of a serious neck injury by up to 47%. Designed to fit all riders comfortably, the chassis is fully adjustable while the structure remains very rigid during a crash. It has an engineered collarbone cut-out to help keep your helmet and brace away from your most fragile bones during a crash. All Leatt neck braces are CE tested and certified as Personal Protective Equipment. Independent off-road motorcycle study by Great Lakes EMS Inc (Action Sports EMS) show that neck braces offer: - Up to 89% reduction in critical cervical spine injuries - Collarbone injuries up to 45% MORE likely WITHOUT a neck brace Specs - Engineered collarbone cut-out to keep your helmet rim away from your most vulnerable bones - Composite matrix platform allows for the most efficient reduction in neck forces - Optimal helmet rim striking platform is designed to redistribute neck forces and provides the helmet with freedom of movement - CoreFlex split rear folding thoracic strut is designed to work with the body's natural movements for a more comfortable fit - Adjustable, four-angle thoracic strut engineered to break away before applying excessive pressure to the back - Sliding front and rear SureFit adjusters offer three-way adjustability for that perfect fit - Sculptured, split front for improved comfort and fit - Low-profile push-button open/closure system - Easy-to-use emergency release mechanism - Injected, durable, and easy-to-clean foam padding - Air flow ribbed body padding for optimum ventilation - Free, optional clear chest strap included - CE tested and certified as Personal Protective Equipment 89/686/EEC - Weight: from 790g (1.74lbs)

Moisture-Wicking Baselayer with Integrated Back and Hip Guards The Baseframe Pro Sleeveless base layer provides moisture management, cooling, and protection in a single low-profile unit. Designed to be worn under your jersey, it provides EN1621-1 Level 1 back protection. Hip pads provide additional protection. Features - EN1621-1 Level 1 Back including high and low-temperature conditions - CE Certified D3O back insert world-leading impact protection technology - Large perforation and flex grooves in the back foam contours and flexes with rider movement - Body heat activates (softens) the polymer to conform to body - Moisture-wicking, open stretch mesh for breathability - Built-in padding at hips offers additional comfort - D3O back insert is removable for easy washing Construction - 35% PU / 37% nylon / 8% polyester / 20% Eva