Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Pedals

iSSi Cleat Set
$16.50
iSSi's SPD cleats are perfect for all your SPD-compatible pedals. If your entry and exit isn't what it used to be, a cleat replacement is just what the bike doctor ordered. - 4 degrees of float both inward and outward
iSSi Keo Compatible Cleat
$25.00
The split-cleat system makes cleat swapping a snap – no need to worry about losing your cleat’s position. - Cleat Bolt Pattern: 3-Bolt - Cleat Compatibility: Pedal iSSi , Look KeO - Cleat bolts and washers included - 4mm hex wrench required to install
iSSi Road Cartridge Spindle Rebuild Kit
$40.00
Replace worn-out spindles or customize your stance width, with these kits for iSSi Road pedals. - Chromoly spindles - Sealed cartridge bearing and bushing in an alloy cartridge - Compatible only with iSSi Road pedals - Installs with iSSi Road spindle tool (TL5499) - Pedal Spindle: 9/16" - Spindle Material: Chromoly Steel
iSSi Thump (Molded Pins)
$40.00
The concave shape and tall pins of the Thump composite pedal provides a "just-right" amount of traction—enough for the rigors of riding off-road—but with nylon pins to keep calves laceration-free on more casual rides. Two different platform sizes accommodate feet from small to Sasquatch. - Tough nylon composite body - Chromoly spindles, sealed cartridge bearings, and nylon bushings - Body: 18.5mm thick with 2.5mm of concavity for great control and pedal feel - Platform size: 119 x 99mm
iSSi Thump (Molded Pins, Small)
$40.00
The concave shape and tall pins of the Thump composite pedal provides a "just-right" amount of traction—enough for the rigors of riding off-road—but with nylon pins to keep calves laceration-free on more casual rides. Two different platform sizes accommodate feet from small to Sasquatch. - Tough, nylon composite body - Chromoly spindles, sealed cartridge bearings and nylon bushings - Body: 18.5mm thick with 2.5mm of concavity for great control and pedal feel - Platform size: 113 x 95mm
iSSi Spindle Rebuild Kit
$50.00 - $52.00
Replace or overhaul iSSi pedals with Bushing & Bearing Spindles with these handy kits, or customize your stance width with longer spindle options. Includes: - iSSi chromoly spindles - Sealed cartridge outer bearings - Inner Bushings - Spindle nuts - Seals - iSSi-branded end caps
iSSi Thump (Replaceable Pins)
$50.00
Built to handle the rigors of riding off-road, the concave shape and tall pins of the Thump composite pedal provide the perfect balance of traction and comfort for a range of applications. The Thump RP version comes with replaceable steel pins that provide solid traction when the trail gets hairy. Two different platform diameters accommodate a range of shoes sizes for a more personalized fit. - Tough, nylon composite body - Chromoly spindles, sealed cartridge bearings, and nylon bushings - Body: 18.5mm thick with 2.5mm of concavity for great control and comfort - Pin height: 3mm out of the box. Remove the 2mm washer under the pin head to convert to 5mm pin height. - Platform size: 119 x 99mm
iSSi Thump (Replaceable Pins, Small)
$50.00
Built to handle the rigors of riding off-road, the concave shape and tall pins of the Thump composite pedal provide the perfect balance of traction and comfort for a range of applications. The Thump RP version comes with replaceable steel pins that provide solid traction when the trail gets hairy. Two different platform diameters accommodate a range of shoes sizes for a more personalized fit. - Tough, nylon composite body - Chromoly spindles, sealed cartridge bearings, and nylon bushings - Body: 18.5mm thick with 2.5mm of concavity for great control and comfort - Pin height: 3mm out of the box. Remove the 2mm washer under the pin head to convert to 5mm pin height. - Platform size: 113 x 95mm
iSSi Pedal Triple Spindle Rebuild Kit
$54.00
Replace or overhaul iSSi pedals with Triple Bearing Spindles with these handy kits, or customize your stance width with longer spindle options. - Chromoly spindles - Three sealed cartridge bearings - Compatible ONLY with iSSi Triple Bearing pedal models: Flash III, Trail III & Flip III - Standard spindle length: 52.5mm - Pedal Spindle: 9/16" - Spindle Material: Chromoly Steel
iSSi Flip I
$60.00
There’s no need to choose between clipless performance and platform versatility with iSSi Flip pedals. Go clipless on the commute or sport a pair of clogs around campus. - Compatible with SPD pedals & cleats - Compatible with two-bolt style shoes - Clipless on one side, platform on the other
iSSi Flash I
$65.00
The Flash I is iSSi's minimalist take on the traditional two-sided clipless pedal. It performs as well on the trail as it does on the commute. - Double bushing spindle, 52.5mm - Smooth-rolling at an affordable pricepoint - SPD-compatible cleats and mounting hardware included
iSSi Trail I
$70.00
iSSi's Trail pedal provides a wider platform, solid pedal contact, and mechanism protection for the rigors of cross-country and all-mountain riding—the iSSi Trail pedal provides the rider with more control and more confidence when the terrain gets tough. - Chromoly spindle, ED-coated - 8mm hex broach - 52.5mm spindle length - SPD Compatible - Black chrome hardware - Adjustable spring tension - 4º cleat float - Compatible with two-bolt style shoes - Two-sided clipless pedal
iSSi iSSi II
$75.00
With bold styling and reliable technology, iSSi Pedals are ready to get you up to speed with clipless pedals. Dual-sided entry makes these SPD-compatible pedals simple to get into, while easily adjustable entry/release tension is perfect for beginners and experts alike. Plus, four degrees of float helps your knees track naturally during every crank revolution.
iSSi Flip II Pedals
$80.00
There’s no need to choose between clipless performance and platform versatility with iSSi's Flip II pedals. Go clipless on the commute or sport clogs on campus. - Flip II: 56.5mm spindle length - Wear 2-bolt style cycling shoes or casual flat shoes - Compatible with iSSi, Shimano SPD, and Wellgo 98A cleats - Chromoly spindle, ED-coated - Standard 15mm wrench flats as well as 8mm hex broach - Black chrome hardware - Adjustable spring tension - 4° cleat float - 14.6° angle of release - Bushing/sealed bearing combination for low-maintenance durability - Pedal Body Material: Aluminum - Pedal Spindle: 9/16-inch
iSSi Flash II
$85.00 - $90.00
The Flash is iSSi's minimalist take on the traditional two-sided clipless pedal. It performs as well on the trail as it does on the commute. - Bushing / Sealed bearing spindle, 52.5mm - Models with longer spindles available in BlackOut - SPD-compatible cleats and mounting hardware included
iSSi Road Carbon Pedals
$100.00
The iSSi Road Carbon Pedals provide large platforms for excellent power transfer and stability. Bushing and sealed cartridge bearings add durability, while the Chromoly spindles resist corrosion for long life. - Simple installation with a 8mm hex key - Stainless Steel cleat plate provides a solid pedal interface - Adjustable spring tension - 7° float, 3-bolt split-cleat included - Cleat Interface: Look KeO - Material: Carbon - Pedal Body Material: Aluminum - Pedal Spindle: 9/16-inch - Pedal Type: Single-Sided Clipless - Spindle Material: Chromoly steel - Weight: 266 grams
iSSi Flash III
$105.00 - $120.00
The Flash is iSSi's minimalist take on the traditional two-sided clipless pedal. It performs as well on the trail as it does on the commute. Three sealed cartridge bearings make the Flash III iSSi’s smoothest rolling, most durable, lightest clipless pedals with multiple spindle length options. - Spindle Type: Flip III: Triple Bearing - Smooth-rolling at an affordable pricepoint - SPD-compatible cleats and mounting hardware included
iSSi Trail II Pedal
$105.00 - $110.00
iSSi's Trail Pedals offer bold styling, reliable technology, and a wide platform for better contact while in and out of the pedal. The Trail platform disperses pressure on your foot and provides a little extra confidence when descending unclipped. Dual-sided entry makes these SPD-compatible pedals simple to get into, while easily adjustable entry/release tension is perfect for beginners and experts alike. Plus, four degrees of float helps your knees track naturally during every crank revolution.
iSSi Stomp
$115.00
Stomp pedals feature a truly concave shape and proprietary pin profile, making these a leader in traction and feel. Fully extruded and CNC-machined to be the ultimate off-road pedal for everything from an all-mountain ride with friends to enduro racing. - Bushing & double bearing spindle configuration - Full-length chromoly spindles for durability - 44 iSSi concave pins (11 per side) and installation tool included - Platform size: 120 x 95 x 18mm - 57mm spindle length
iSSi Stomp XL
$115.00
Stomp pedals feature a truly concave shape and proprietary pin profile, making these a leader in traction and feel. Fully extruded and CNC-machined to be the ultimate off-road pedal for everything from an all-mountain ride with friends to enduro racing. - Bushing & double bearing spindle configuration - Full-length chromoly spindles for durability - 44 iSSi concave pins (11 per side) and installation tool included - Platform size: 120 x 102 x 18mm - 64.5mm spindle length
iSSi Trail III Pedal
$125.00 - $130.00
iSSi's Trail Pedals offer bold styling, reliable technology, and a wide platform for better contact while in and out of the pedal. The Trail platform disperses pressure on your foot and provides a little extra confidence when descending unclipped. Dual-sided entry makes these SPD-compatible pedals simple to get into, while easily adjustable entry/release tension is perfect for beginners and experts alike. With triple-sealed cartridge bearings and durable chromoly spindles, these pedals will spin smoothly for countless rides. Plus, four degrees of float helps your knees track naturally during every crank revolution.
Xpedo XPR Cleat Set
$25.00
Xpedo XPR cleat set for R-FORCE 6 is an SPD style cleat specifically designed for 3-hole road shoes. - Weight: 135g per set with hardware - Float: 6°
Xpedo Spry Pedals
$79.00
Weighing in at a mere 260 grams per set, the SPRY, with its sleek, super low-profile design, makes a great addition to the XPEDO flat pedal line up. The magnesium-cast body measures only 11mm thin and allows plenty of ground clearance in the most aggressive terrains. Its large platform area with 14 pins on each pedal provides superior grip for maximum pedal efficiency. - Weight: 260g - Body: Magnesium - Spindle: CroMo - Bearings: 2 Cartridge - Bushings: 1 DU - Pins: 28 Straight Pins per pair - Size: 106x100x11 (mm)
Xpedo Thrust NXS Pedals
$99.00
- Weight: 220g  - Body: NEP Injection-Molded - Spindle: Cromoly  - Bearings: 3 Cartridge - Springs: SWP  - Q-Factor: ±53 (mm) - Cleat: XPEDO THRUST 7 (6º Float or Fixed)
Xpedo Baldwin Cromoly Pedals
$119.00
The Baldwin offers the best of both worlds, bridging the gap between the demands of XC racer to the enduro rider. It features the tried and true Posi-Lock retention system protected by a robust 6061 CNC body providing extra support. -  Weight: 332g CrMo -  Body: 60661 CNC AL -  Spindle: Cromoly -  Bearings: 3 Cartridge  -  Springs: SWP  -  Cleat: XPEDO XPT (6° Float)
Xpedo GFX Pedals
$129.00
Xpedo's designers went back to the drawing board for the GFX to create a fresh new design to meet the demands of the evolving downhill racing styles. The latitude entry system allows rapid engagement in any condition, positioning the front claw upwards for intuitive, seamless contact with the pedal. The Posi-Fit retention system is fully adjustable for fine-tuning the entry and release. The low-profile 6061 CNC body with adjustable height pins provide traction and support with any style of shoes. Tapered cromoly spindles roll on three precision cartridge bearings for easy maintenance. Wider Q-factor allows ample clearance between shoe and crankarm. - Weight: 468g CrMo - Body: 60661 CNC AL - Spindle: Cromoly - Bearings: 3 Cartridge - Springs: SWP - Pins: 16 adjustable height grub pins per pair - Cleat: XPEDO XPT (6° Float)
Xpedo Baldwin Ti Pedals
$189.00
The Baldwin offers the best of both worlds bridging the gap between the demands of XC racer to the enduro rider. It features the tried and true Posi-Lock retention system protected by a robust 6061 CNC body providing extra support. - Weight: 292g Ti - Body: 60661 CNC AL - Spindle: Titanium - Bearings: 3 Cartridge - Springs: SWP - Cleat: XPEDO XPT (6° Float) *Titanium spindles have 180lbs weight limit.
Wheels Manufacturing Inc. Pedal Washers
$10.00
Wheels Manufacturing Pedal Washers help distribute the forces of a pedal spindle on your expensive crank arms and allow you to torque pedals properly over and over again without damaging crank arms. - Includes 10 washers
Wellgo LU-895 Pedals
$12.00
- 1-Piece, molded, cage-style body - Loose ball bearings - Accepts toe clips/straps - Spindle Material: Chromoly - 305g
Wellgo WG5 Pedals
$20.00
- Slip-resistant surface - Loose ball bearings - 9/16" - Spindle Material: Chromoly - Weight: 431 g - Pedal Body Material: Aluminum
Wellgo WPD-823 Pedals
$39.95
Wellgo WPD-823 Clipless Mountain Pedals. - Includes 98A cleats, Shimano SM-51 compatible - Dual-spring release/entry tension adjustment - Four degrees of Rotation - 9/16"
VP Components VP-ARC6 Split Cleats
$22.00
VP's Split Cleats boast super-smooth and easy entry/exit into your clipless pedals, excellent durability and maximum power transfer. They're made of a tough and light composite material, are compatible with VP and Look Keo pedals (pedals sold separately) and even have areas that grip for walking traction. That's all great, but what really sets the Split Cleats apart is how easily and accurately they can be replaced when they wear out. The cleats split in half so that you simply remove each half and use the half still on the shoe to ensure perfect cleat placement every time! With these cleats you'll never have to fuss around trying to get your new cleats in the right place again and it only takes a minute or two to replace cleats, too. Genius! The Split Cleats are available in 2 models, one with 7 degrees of lateral float for your feet and one that's fixed (no float). - Fits VP and Look Keo pedals (pedals sold separately)
VP Components VP-001 Flat Pedals
$80.00
VP's Flat Pedals combine wide platforms and a great grip for excellent stability with extruded and CNC-machined aluminum bodies for light weight and a rainbow of colors for high style. You also get tough chromoly axles and sealed bearings for durability. - 345 grams - 9/16" axles
VP Components VP-69 Pedals
$80.00
VP's 69s are the perfect DH race, freeride, trail and BMX pedals. They are optimized for sticky shoes with 6 pins (VP's tallest and sharpest) per side on concave platforms that also grip your soles. These trick pedals boast extruded and CNC-machined aluminum bodies, tough chromoly axles and sealed bearings for long life. The bodies are built to withstand rock strikes without losing pins, too. - 384 grams - These are 9/16-inch pedals
VP Components VP-R73 Carbon Road Pedals
$90.00
VP's R73 Carbon Road Pedals are their top-of-the-line Look-cleat compatible clipless road-bike pedal. They offer easy and secure entry/exit, a feathery weight and awesome power transfer. These fine pedals boast light and durable carbon bodies with stainless-steel reinforcements to reduce cleat wear; tough CNC-machined chromoly axles and super-high-quality sealed bearings for long life. You also get VP's ingenious Split Cleats that split into two with the use of a jigsaw-like keyed section making cleat replacement easy, fast and extremely accurate for anyone. The cleats have 7 degrees of lateral foot float and the pedals have adjustable release tension, too. - 280 grams
VP Components VP-Vice Pedals
$103.99
VP's Vice pedals are nice, flat pedals that perform and look great. They have large platforms and are low-profile reducing impacts with rocks and roots if you use them off-road (they're perfect for BMX and other bikes, too). They have 12 pins per side so they grip no matter what, and they feature extruded/CNC-machined aluminum bodies with heat-treated chromoly axles and sealed bearings for durability. - 406 grams - 9/16" axles
Tioga DAZZ MX Pedals
$30.00
Alloy pedals with a smaller platform that is ideal for smaller sized shoes and offers ample ground and cornering clearance. - 6061-T6 die-cast alloy body construction - 2DU Bushing System with low-friction coating - Boron axles - 14 removable traction pins per pedal - Pedal body dimensions: 105 x 93 x 25mm (LxWxH) - 9/16"
The Shadow Conspiracy Ravager Pedals
$17.99
The Shadow Conspiracy Ravager Pedals - Injection-molded composite with molded pins - Loose ball only - 4140 heat-treated spindle - 9/16"
The Shadow Conspiracy Surface Pedals
$18.99
The new Shadow Surface Pedal is made with performance and function in mind. Starting with a wider and longer, slim platform. The wide 105mm x100mm platform is specifically shaped to be thin and stiff while still offering an overall concave shape. Added advanced micro-knurling and 12 pins per side for a maximum grip that still allows foot adjustments mid-shred. Made with the same proven nylon-composite material as the Ravager pedal, with a heat-treated chromoly axle that includes a 6mm broach for ease of installation and high-end looks. - Injection-molded nylon-composite body - Heat-treated 4140 chromoly broached spindle - 105mm length x 100mm wide - 3.5mm pin height - 12 pins per side - Thickness: 18mm and 24mm at bearing cover - 9/16"
Sunlite FlatForm II Exerciser Pedal Straps
$6.99
Replacement straps for Sunlite FlatForm II pedals - Strap size: 340 x 55mm
Sunlite Toe Straps
$6.99
- Heavy-duty nylon toe straps with classic style steel buckles - Narrow design fits most cage style pedals - 460mm length
Sunlite ATB Toe Clips and Straps
$7.99
- Nylon clips - Woven straps - For ATB or hybrid use
Sunlite Mini Half Toe Clips
$8.00
• City/road half clips • With reflectors • No straps needed • Resin
Sunlite Juvenile Pedals
$9.59
- One-piece resin body - Juvenile size platform - Boron spindle - 390g pair
Sunlite Leather Toe Straps
$9.99
- Real leather material - Classic design fits most caged pedals
Sunlite Pedal Blocks
$9.99
- Fits most platform pedals - Two wooden riser blocks w/durable rubber band - Adds 3/4" to each side (1-1/2" total)
Sunlite ATB Pedals
$10.00
- Plastic nylon molded body - Chromoly spindle - 318g pair
Sunlite Grabber Platform Pedals
$10.00
- One-piece ABS resin body - Molded pins - 320g pair
Sunlite Cruiser 990 Pedals
$12.99
- One-piece resin body with rubber surface for grip - Boron spindle - 446g pair
Sunlite Pro MTB SPD Pedal Cleats
$12.99 - $15.39
- Fits most MTB shoes - For clipless SPD-style pedals - 4-degree float
Sunlite Classic Block Pedals
$14.99
- Galvanized steel pedal body - 2-piece block platform - Boron axle - Plastic blocks w/ integrated reflector - 553g pair
Sunlite SPD Cleats
$15.99
- SPD compatible - Single release - Hardware included
Sunlite Racing Toe Clips
$16.99
- Steel - Quality leather straps included
Sunlite Cruiser Pedals
$19.99
- One piece alloy body with rubber surface for grip - Chromoly spindle - 574g pair (9/16")
Sunlite Folding City Pedals
$19.99
- 1 piece folding pedal with a black boron spindle - Dual sleeve bearings for maintenance free longevity - 9/16" spindle - Platform size: 102mm x 74mm - Weight: 294g per pair
Sunlite Folding Pedals
$19.99
- Folding pedal such as those often found on folding bicycles - Alloy carrier with plastic pedal body - Locking mechanism secures pedals in position - Chromoly spindle - 436g pair
Sunlite Pedal Extenders
$19.99
- Extends pedals - Not for use on exercise bikes
Sunlite Low Profile ATB Pedals
$20.00
- Forged alloy body and cage - Chromoly spindle - Toe clip compatible - 391g pair - 9/16-inch spindle
Sunlite Cruz Sport Pedals
$21.99
- Polished one-piece alloy body - Boron spindle - Toe clip compatible - Approximately 450g pair
Sunlite Classic Rubber Pedals
$23.99
- Rubber platform increases comfort and grip - With reflectors
Page 1 of 5 Next page